Solutions > Handling Conveyor > Carton/Bag Handling Conveyor
Bag Flattener – BK- BFT- Belt Sandwich
- The drive units are using 2 units of 0.4KW 3 phase motor to drive.
- The belt is using 2 ply PVC “AMMERAAL” belt.
- This design will have better shaping of bag compare to the roller type.
- The sandwich function can be by pass by activating the valve to lift up the upper conveyor.
- The drive pulley is diameter 139mm and take up diameter is diameter 119mm.
- This design will have better effect of flatten.
Station Conveyor, BK-STC- Bag
- The rollers are using “INTERROLL” precision bearing rollers.
- Motor power is 0.4KW, 3-phase 415V, “SUMITOMO”.
- The V-belt is using the: “MITSUBOSHI” red tape high resistance belt.
- The first 3 rollers are come with the rubber sleeves.
- The clearance in between the rollers will allow the gripper fingers to slot in for pick up the bags.
- The center belt will help to transfer the bags more positive into the station conveyor.
Cam Adjusted Accumulation Live Roller, CN-CALR
- Pop up roller concept. It is safe as the rollers will pop up if anything is jam in between the rollers.
- Roller pressure can be adjusted using the cam pressure plate.
- Max length up to 30M is possible.
- Max roller width up to 1.2M
- Center belt using 200mm and 300mm width.
Line Drive Roller Conveyor, CN-LD-S
This roller conveyor is using a poly cord belt on a drive shaft and can drive up to 30-40M length. Varieties of units are available included straight, curve and branch unit.